BackTrack Retro-Pro D3 Building Jig $118.00

BackTrack Retro-Pro D3 Building Jig $118.00 with separate wire bender

BackTrack Retro-Pro D3 Building Jig $118.00 with separate wire bender

Lucky Bob's Corian Chassis Jig

Lucky Bob's Corian Chassis Jig for 3/32 and 1/8 Axles

Lucky Bob's Corian Chassis Jig for 3/32 and 1/8 Axles

Lucky Bob's Corian Dragster Chassis Jig

Lucky Bob's Corian Dragster Chassis Jig With 3/32 and 1/8 Axles - LB 1025

Lucky Bob's Corian Dragster Chassis Jig With 3/32 and 1/8 Axles

Lucky Bob's Formica Chassis Jig

Lucky Bob's Formica Chassis Jig can be used with 3/32 and 1/8 Axles

Lucky Bob's Formica Chassis Jig can be used with 3/32 and 1/8 Axles

PSC Body Mounting jig

body pinning jig

Precision Slot Cars has a new product for soldering in pin tubes and pinning bodies, This one does it all! Designed for the 2 piece chassis's, fixtured to hold the X24, C-11 and both 4" and 4 1/2" turbo flex chassis's

PSC Champion Turbo-Flex chassis jig

PSC Champion Turbo-Flex chassis jig

Champion Turbo-Flex precision chassis fixture. Designed to hold chassis and guide flag perpendicular to the front and rear axle. Use 1/8",3/32" or1/16" diameter for front axle. Outstanding performance and handling. A must have for the serious racer. Works with 1/8" and 3/32" axles, 4" and 4 1/2"

PSC Cheetah 11 Chassis Jig

Cheetah 11 Chassis building jig

Cheetah 11 Chassis building jig. sets your chassis and guide flag perpendicular to the rear axle. Be absolutely sure your car runs straight. Outstanding performance and handling. A must have for any serious racer

PSC Cheetah X24 Chassis jig

PSC Cheetah X24 Chassis jig

PSC Cheetah X24 Chassis jig precision chassis fixture sets your chassis and guide flag perpendicular to the rear axle. Be absolutely sure your car runs straight. Outstanding performance and handling. A must have for any serious racer. Works with 3/32" and 2mm axles.

PSC JK X32 chassis jig

PSC JK X32 chassis jig

The new JK X32 chassis jig. X32 precision chassis fixture sets your chassis and guide flag perpendicular to the front and rear axles. New added feature of 4 posts for locating the front axle. Be absolutely sure your car runs straight. Works with 2mm and 3/32" axles.

PSC Parma FCR chassis jig

PSC Parma FCR chassis jig

FCR precision chassis fixture. Designed to hold the chassis and guide flag perpindicular to the rear axle. Works for setting the front axle, an often over looked part of FCR chassis building.

Subscribe